Voltronic Axpert Max II 10K-48 10000 Watt 48 Volt Inverter Off Grid Solar Island
€1.082,40
Voltronic Axpert MAX II 10000-48 Inverter 10kw single-phase 48Volt solar photovoltaic for off-grid stand-alone systems
• Status indication with RGB lights
• Integrated Wi-Fi for mobile monitoring (Android / iOS app available)
• Supports USB On-the-Go function
• Communication port reserved for BMS (RS485, CAN-BUS or RS232)
• Replaceable fan design for ease of maintenance
• Battery independent design
• Configurable timer and priority of use of the AC / PV output
• High power selectable charging current
• Selectable input voltage range for home appliances and personal computers
– Communication with BMS battery Pylontech US2000/US3000, Solarpower24 2.4kw/4.8kw Yilink 2.4kw/4.8kw/7.2kw
• Compatible with mains or generator input
• Built-in dustproof kit
• Optional DC output for DC fan, LED bulb, router and so on.
• Parallel operation with 6 units
- Description
- Additional information
Description
MODEL |
10KW |
Input voltage waveform |
Sinusoidal (AC mains or generator) |
Rated input voltage |
230Vac |
Low voltage loss |
170Vac ± 7V (UPS) 90Vac ± 7V (equipment) |
Low Return Voltage Drop |
180Vac ± 7V (UPS); 100Vac ± 7V (Equipment) |
High Voltage Drop |
280Vac ± 7V |
High Return Voltage Drop |
270Vac ± 7V |
Max. AC input voltage |
300Vac |
Current Max. AC input |
60A |
Rated input frequency |
50Hz / 60Hz (Auto Detect) |
Low Frequency Drop |
40 ± 1Hz |
Low Return Voltage Drop |
42 ± 1Hz |
High Frequency Drop |
65 ± 1Hz |
High Return Voltage Drop |
63 ± 1Hz |
Short circuit protection at the output |
Line Mode: RCD (70A) Battery mode: Electronic Circuits |
Efficiency (Line Mode) |
>95% (Rated load R, battery fully charged) |
Transfer duration |
10ms typical (UPS); 20ms typical (equipment); |
Output power reduction: If the AC input voltage drops below 170V, the output power will be reduced. |
MODEL |
10KW |
Rated output power |
10000W |
Output voltage waveform |
Pure sine wave |
Output voltage regulation |
230Vac ± 5% |
Output frequency |
60Hz or 50Hz |
Peak efficiency |
93% |
Overload protection |
100ms @ ≥205% load; 5s @ ≥150% load; 10s @ 110 %~150% load |
Overload capacity |
2 * Rated power for 5 seconds |
Low DC alarm voltage |
46.0Vdc 42.8Vdc 40.4Vdc
|
@ load< 20% @ 20% ≤ load< 50% @ load ≥ 50% |
|
Low DC Alarm Return Voltage |
48.0Vdc 44.8Vdc 42.4Vdc
|
@ load< 20% @ 20% ≤ load< 50% @ load ≥ 50% |
|
Low DC cutoff voltage |
44.0Vdc 40.8Vdc 38.4Vdc
|
@ load< 20% @ 20% ≤ load< 50% @ load ≥ 50% |
|
High recovery DC voltage |
61Vdc |
High DC cutoff voltage |
63Vdc |
DC voltage accuracy |
|
THDV |
<5% for linear load,< 10% for non-linear load @ rated voltage |
DC offset |
≦ 100mV |
Consumption without load |
<75W |
AC Grid Load Mode |
|||
MODEL |
10KW |
||
Charging current (UPS) @ Nominal input voltage |
150A (@V I / P = 230Vac) |
||
Bulk Charge Voltage |
Lead-acid battery |
58.4Vdc |
|
AGM / Gel battery |
56.4Vdc |
||
Charging float voltage |
54Vdc |
||
Overload protection |
63Vdc |
||
Charging algorithm |
3 step |
||
Charge curve |
|||
Solar entrance |
|||
MODEL |
10KW |
||
Nominal power |
10000W |
||
Max. PV array open circuit voltage |
500Vdc |
||
PV array MPPT voltage range |
90Vdc ~ 450Vdc |
||
Max. Input current |
18A x 2 |
||
Starting voltage |
80V +/- 5Vdc |
||
Power limitation |
Table 4 General Specifications
MODEL |
10KW |
Safety certification |
THERE IS |
Operating temperature range |
– 10 ° C + 50 ° C |
Storage temperature |
-15 ° C ~ 60 ° C |
Humidity |
5 – 95% relative humidity (non-condensing) |
Dimensions (P * W * H), mm |
158.4x 503.6 x 530.8 |
Net weight, kg |
20 |
Table 5 Parallel Specifications
Nr. max. in parallel |
6 |
Circulation current under no-load conditions |
Max. 2A |
Power imbalance ratio |
<5% @ 100% load |
Parallel communication |
CAN |
Transfer time in parallel mode |
Max.50ms |
Parallel Kit |
YES |
Note: The parallel function will be disabled if only PV power is available
.
The product can be sold with VAT reduced to 10% exclusively to Italian residents with shipping to Italy. In case of foreign customers, the site will recalculate according to the vat rate of the destination country
THE FORM YOU CAN FIND HERE
https://www.cercastock.it/repository/_barba_srl_dich_10.pdf
THE PRODUCT CANNOT BE SHIPPED UNTIL THE COMPLETED FORM IS RECEIVED
AT EMAIL ADDRESS moduloiva@solarpower24.it or by fax at 0545030125